Aluminium Sprocket Nut 10mm Drilled

Aluminium Sprocket Nut 10mm Drilled
Part Number: LSPN10D
1 thing 0 5 5


Aluminium Sprocket Nut 10mm Drilled: Manufactured using Aerospace High Tensile Anodised Aluminium then fitted with a steel helicoil for additional strength. Supplied with fitment instructions which specify a lower torque setting of 33ft/lb or 44 NM. Nuts have a 16mm Socket Size. Nuts have a flange diameter of 19mm and are pre-drilled.

Additional Information

Part No. LSPN10D
Material Aluminium
Product Type Nut
Weight in Gms 3.2700
Country of Manufacture United Kingdom
Thread Diameter 10mm
Thread Pitch 1.25mm
Outside Diameter 19mm
Height 10mm
Socket Size 16mm
Pack Quantity 1

Material Information 


Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.

  • Density2730kg/m3 (170lb/ft3)
  • Young's Modulus 72GPa (10.4 x 106 psi)
  • Yield Strength 505MPa (73.2 x 103 psi)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 505MPa (73.2 x 103 psi)
  • Shear Modulus27GPa (3.92 x 106 psi)
  • Shear Strength330MPa (47.9 x 103 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.33
  • Hardness 150 Brinell
  • Strength-to-Weight Ratio 185 kNm/kg
  • Stiffness-to-Weight Ratio 26.4 Mnm/kg


1 Review(s)

  1. Matt -

    Nice that these now come drilled. Fit perfect. Older set that was not drilled has not come loose. Will safety wire these, but I’d assume it’s not needed.

Write a Review 

You are reviewing

Aluminium Sprocket Nut 10mm Drilled

Only registered users can write reviews. Please, log in or register