Aluminium Dome Nut M10 (Din 1587) Pack x 10

Aluminium Dome Nut M10 (Din 1587) Pack x 10
Part Number: DOMENUT10-10


Aluminium Dome Nut M10 (Din 1587) Pack x 10 .

High Tensile Anodised Aluminium. Cap off your ends. Excellent for covering unsightly studs etc.

Additional Information

Part No. DOMENUT10-10
Material Aluminium
Product Type Nut
Weight in Gms 60.6000
Bar Code 5053573530745
Country of Manufacture United Kingdom
Thread Diameter 10mm
Thread Pitch 1.50mm
Outside Diameter 17mm
Height 18mm
Socket Size 17mm
Pack Quantity 10

Material Information 


Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.

  • Density2730kg/m3 (170lb/ft3)
  • Young's Modulus 72GPa (10.4 x 106 psi)
  • Yield Strength 505MPa (73.2 x 103 psi)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 505MPa (73.2 x 103 psi)
  • Shear Modulus27GPa (3.92 x 106 psi)
  • Shear Strength330MPa (47.9 x 103 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.33
  • Hardness 150 Brinell
  • Strength-to-Weight Ratio 185 kNm/kg
  • Stiffness-to-Weight Ratio 26.4 Mnm/kg

Write a Review 

You can earn 150 Pro-Bolt Pro-Bolt loyalty points for writing a review/rating this product.

You are reviewing

Aluminium Dome Nut M10 (Din 1587) Pack x 10

Only registered users can write reviews. Please, log in or register