Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 5

Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 5
Part Number: FB412-5


Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 5

0.7mm pitch Dome 8mm O.D. Head Bolt with Allen Key Drive, length measurement is taken from under the head.

Material High Tensile Anodised Aluminium. 

Additional Information

Part No. FB412-5
Product Type Bolt
Material Aluminium
Weight in Gms 2.0500
Bar Code 5053573530875
Country of Manufacture United Kingdom
Thread Diameter 4mm
Head Style Dome Head
Head Diameter 8mm
Head Height 4mm
Allen Key Size 2.5mm
Thread Pitch 0.70mm
Length 12mm
Thread Length 12mm
Pack Quantity 5

Material Information 


Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.

  • Density2730kg/m3 (170lb/ft3)
  • Young's Modulus 72GPa (10.4 x 106 psi)
  • Yield Strength 505MPa (73.2 x 103 psi)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 505MPa (73.2 x 103 psi)
  • Shear Modulus27GPa (3.92 x 106 psi)
  • Shear Strength330MPa (47.9 x 103 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.33
  • Hardness 150 Brinell
  • Strength-to-Weight Ratio 185 kNm/kg
  • Stiffness-to-Weight Ratio 26.4 Mnm/kg

Write a Review 

You can earn 150 Pro-Bolt Pro-Bolt loyalty points for writing a review/rating this product.

You are reviewing

Aluminium Dome Head Bolt M4 x (0.7mm) x 12mm Pack x 5

Only registered users can write reviews. Please, log in or register