Aluminium Cup Washer M10

Aluminium Cup Washer M10
Part Number: LWACP10


Aluminium Cup Washer M10

The cup slides up the thread of an Allen Key Bolt and shrouds the head, leaving the head surface exposed, designed to be used in conjunction with Button Inserts.

Size refers to the Bolt thread diameter.

Try these with contrasting or matching Button Inserts for a truly unique look.

Material High Tensile Anodised Aluminium.

Additional Information

Part No. LWACP10
Material Aluminium
Product Type Washer
Weight in Gms 3.3500
Bar Code 5053573533470
Country of Manufacture United Kingdom
Thread Diameter 10mm
Outside Diameter 19mm
Thickness 13mm
Pack Quantity 1

Material Information 


Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.

  • Density2730kg/m3 (170lb/ft3)
  • Young's Modulus 72GPa (10.4 x 106 psi)
  • Yield Strength 505MPa (73.2 x 103 psi)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 505MPa (73.2 x 103 psi)
  • Shear Modulus27GPa (3.92 x 106 psi)
  • Shear Strength330MPa (47.9 x 103 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.33
  • Hardness 150 Brinell
  • Strength-to-Weight Ratio 185 kNm/kg
  • Stiffness-to-Weight Ratio 26.4 Mnm/kg

Write a Review 

You are reviewing

Aluminium Cup Washer M10

Only registered users can write reviews. Please, log in or register