Aluminium Button Insert M5 Pack x 10

Aluminium Button Insert M5 Pack x 10
Part Number: BUT5-10


Aluminium Button Inserts M5 Pack x 10.

Please note these are designed to fit a 5mm bolt with a 4mm Allen Key Drive.

Add the finishing touch with these neat little high tensile anodised aluminium buttons. Supplied with 'O' rings to form an airtight seal and keep out dirt.

Why not use in conjunction with our cup washers for a unique colour co-ordinated look?

Available in M5, M6, M8 and M10.

Additional Information

Part No. BUT5-10
Bar Code 5053573530219
Material Aluminium
Product Type Finishing Touches
Weight in Gms 1.5000
Country of Manufacture United Kingdom
Height 4mm
Outside Diameter 8mm
To Fit Allen Key Size 4mm
Pack Quantity 10

Material Information 


Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.

  • Density2730kg/m3 (170lb/ft3)
  • Young's Modulus 72GPa (10.4 x 106 psi)
  • Yield Strength 505MPa (73.2 x 103 psi)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 505MPa (73.2 x 103 psi)
  • Shear Modulus27GPa (3.92 x 106 psi)
  • Shear Strength330MPa (47.9 x 103 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.33
  • Hardness 150 Brinell
  • Strength-to-Weight Ratio 185 kNm/kg
  • Stiffness-to-Weight Ratio 26.4 Mnm/kg

Write a Review 

You are reviewing

Aluminium Button Insert M5 Pack x 10

Only registered users can write reviews. Please, log in or register