Aluminium Button Insert M10

Previous
Next
Aluminium Button Insert M10
$1.33
Part Number: LBUT10
2 thing 0 5 5
$1.33
 

Description 

Aluminium Button Inserts M10.


Please note these are designed to fit a 10mm bolt with a 8mm Allen Key Drive.


Add the finishing touch with these neat little high tensile anodised aluminium buttons. Supplied with 'O' rings to form an airtight seal and keep out dirt.


Why not use in conjunction with our cup washers for a unique colour co-ordinated look?


Available in M5, M6, M8 and M10.

Additional Information

Part No. LBUT10
Bar Code 5053573532299
Material Aluminium
Product Type Finishing Touches
Weight in Gms 1.0000
Country of Manufacture United Kingdom
Thread Diameter 10mm
Height 6.7mm
Outside Diameter 15mm
To Fit Allen Key Size 8mm
Pack Quantity 1

Material Information 

Aluminium

Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.

  • Density2730kg/m3 (170lb/ft3)
  • Young's Modulus 72GPa (10.4 x 106 psi)
  • Yield Strength 505MPa (73.2 x 103 psi)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 505MPa (73.2 x 103 psi)
  • Shear Modulus27GPa (3.92 x 106 psi)
  • Shear Strength330MPa (47.9 x 103 psi)
  • Ductility 10% elongation at break
  • Poisson's Ratio0.33
  • Hardness 150 Brinell
  • Strength-to-Weight Ratio 185 kNm/kg
  • Stiffness-to-Weight Ratio 26.4 Mnm/kg

Reviews 

2 Review(s)

  1. itai -
    Nice touch

    Very nice touch to the bike!!! Add it to my spools. Looks great. Very recommand!!!

  2. Ryan -
    Cheap but effective

    Had these on my yoke bolts since June '17. I was weary of the anodising peeling off etc as you get with cheap fasteners or having them fall out due to poor fit, but glad to say they still look like new and havent fallen out! They're a nice tight fit in the bolt thanks to the rubber o-ring they come with. The old bolts looked horrible as they were but popped these in and it instantly added a nice clean look. Takes literally a few seconds to fit them and easy to remove/refit. Well worth the money considering the ease of use and visual gains.

Write a Review 

You are reviewing

Aluminium Button Insert M10

Only registered users can write reviews. Please, log in or register