Stainless Steel Fairing Bolt 1/4" x (20TPI) x 2-1/2"

Stainless Steel Fairing Bolt 1/4" x (20TPI) x 2-1/2"
Part Number: LSSFBUNC130


Stainless Steel Domed Head Bolt
Most popular for use on bodywork and plastics, these attractive dome heads are manufactured with the smallest possible Allen key drive, whilst the large head diameter spreads the load and gives the most appealing cosmetic appearance. Though these are not just about looks. Made from 316 Stainless Steel and machined with rolled threads, these bolt are strong, highly polished and corrosion resistant. Sold here individually but also available in packs of 5 & 10.

Prefer something a little more subtle? Stainless Steel is also available in black, which not only looks great but has other benefits too..
This beautiful long lasting black finish results from an application of Diamond Like Carbon Coating (DLC) This gives supreme hardness and corrosion resistance provided by a nano composite coating, which increases the fastener lifetime dramatically and helps to prevent galling. By incorporating them right from the beginning, the overall system cost can be held level or may even be reduced.

Please note that due to this special coating Black Stainless Steel is not identical to our Black Aluminium.

Additional Information

Color Polished Stainless
Part No. LSSFBUNC130
Product Type Bolt
Material Stainless
Weight in Gms 15.4300
Bar Code 5053573294098
Country of Manufacture United Kingdom
Thread Diameter 1/4"
Head Style Dome Head
Head Diameter 7/8"
Allen Key Size 5/32"
Thread Pitch 20 tpi
Length 2-1/2"
Thread Length 1"
Pack Quantity 1

Material Information 

Stainless Steel

Manufactured from A316 stainless steel. A316 stainless steel has a minimum chromium content of 16.5% and contains elements of carbon, molybdenum, silicon, phosphorus, sulphur, nickel, manganese and iron, all of which add properties of formability, strength, weldability and enhanced corrosion resistance. All of the fasteners are highly polished to a mirror-like finish.

  • Density 8030kg/m3 (501lb/ft3)
  • Young's Modulus 193GPa (28 x 106psi)
  • Yield Strength 260MPa (37.7 x 103)
  • Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
  • Compressive Strength 260MPa (37.7 x 103 psi)
  • Shear Modulus78GPa (11.3 x 106 psi)
  • Ductility 40% elongation at break +
  • Minimum value allowed by ASTMA240
  • Poisson's Ratio0.27
  • Hardness 95 Rockwell B+
  • Maximum value allowed by ASTMA240
  • Strength-to-Weight Ratio 32.4 kNm/kg
  • Stiffness-to-Weight Ratio 24.0 Mnm/kg

Black Stainless Steel: Long lasting finish resulting from an application of Diamond Like Coating (DLC). This unique finish increases the fastener lifetime and helps to prevent galling whilst providing a supreme hardness and offering the optimum in corrosion resistance thanks to a nanocomposite coating.

Write a Review 

You can earn 150 Pro-Bolt Pro-Bolt loyalty points for writing a review/rating this product.

You are reviewing

Stainless Steel Fairing Bolt 1/4" x (20TPI) x 2-1/2"

Only registered users can write reviews. Please, log in or register