Machined to a smooth finish in your choice of colour complete with 'O' ring.
Complements our engine casing bolt kits to achieve the finished look.
Designed to fit a range of BMW R1200GS’s.
|Product Type||Engine Kits / Parts|
|Weight in Gms||16.3200|
|Country of Manufacture||United Kingdom|
Manufactured from 7075T6 aluminium, and suitable for use in all non-safety critical areas, all products are available in a choice of black, blue, gold, gunmetal grey, orange, purple, red and silver. During manufacturing, the head is cold formed and the shank thread rolled. The anodising involves chemically brightening and colour anodising to between 8 and 12 microns thick. We offer Race Spec Drilled Flanged Hex Head, Socket Cap Bolts, Countersunk Bolts, Dome Head Bolts, Nuts and Washers – from 3mm to 10mm.
- Density2730kg/m3 (170lb/ft3)
- Young's Modulus 72GPa (10.4 x 106 psi)
- Yield Strength 505MPa (73.2 x 103 psi)
- Ultimate Tensile Strength 570MPa (82.7 x 103 psi)
- Compressive Strength 505MPa (73.2 x 103 psi)
- Shear Modulus27GPa (3.92 x 106 psi)
- Shear Strength330MPa (47.9 x 103 psi)
- Ductility 10% elongation at break
- Poisson's Ratio0.33
- Hardness 150 Brinell
- Strength-to-Weight Ratio 185 kNm/kg
- Stiffness-to-Weight Ratio 26.4 Mnm/kg
- Motorcycle BMW R1200G 04+
- Motorcycle BMW R1200GS 08-09
- Motorcycle BMW R1200GS 10-12
- Motorcycle BMW R1200GS TE 14+
- Motorcycle BMW R1200GS Adventure 10-13
- Motorcycle BMW R Nine T Sport 16+